APRS (Automatic Packet Reporting System) is digital communications information channel for Ham radio.
Mobile: M0YMA-9
Normally, I will be beaconing my position using SSID M0YMA-9 from my mobile.
Note: the beacon status will normally set to “Off Duty” as I do not monitor incoming beacons or messages while driving!
When operating from a portable location, the beacon-status text should give information about my location and/or operating frequency.
iGates
I am experimenting with a RaspberryPi 4 hosted applications… the intention is that it will (eventually) be commissioned as a full digipeater and igate. Watch this space…
M0YMA
M0YMA-1 is running DireWolf 1.5 as a receive-only iGate, connected to node T2UK on the APRS2 network.
This device is a very primitive set-up… a RaspberryPi 4 with a RTLSDR RTL2832U DVB-T Tuner Dongle connected to a small sub antenna – it is intended as a proof of concept.
iGates M0YMA-1 and M0YMA-5
M0YMA-1 and M0YMA-5 are offline. These were experiments using RasPi 3Bs.